How Much Does a Patio Cost to Install?

What Does a Patio Cost?

Installing a patio typically costs between $2,000 and $12,000, and the material decides where in that band you land. For a common 250 to 400 square foot patio, expect roughly $2,000 to $5,600 for poured broom-finish concrete, $3,500 to $8,800 for stamped concrete, and $2,500 to $10,000 or more for pavers. The biggest driver is the material you choose and the size of the patio, since patios are priced largely by square foot. Concrete is the most budget-friendly at $8 to $22 per square foot, pavers run $10 to $25 per square foot, and natural stone is the premium option at $15 to $30 per square foot. Here’s how the cost breaks down by material so you know what to expect.

Concrete Patios: $8 to $22 per Square Foot

A poured concrete patio is the most budget-friendly option, at $8 to $22 per square foot, or about $2,000 to $5,600 for a broom-finished patio of 250 to 400 square feet. Concrete is durable, versatile, and can be finished in various ways (stamped, colored, or stained) to improve its appearance, though basic broom-finished concrete is the cheapest. Its lower cost makes it popular for larger patios where material cost adds up. Decorative treatments raise the price toward the upper end: broom finish runs about $8 to $14 per square foot, while stamped concrete runs $14 to $22, or roughly $3,500 to $8,800 for a typical patio. Even then, concrete typically costs less than pavers or stone. For a cost-conscious patio, concrete offers durability and function at the lowest per-square-foot price.

Paver Patios: $10 to $25 per Square Foot

Paver patios, made of individual concrete, brick, or stone units, cost $10 to $25 per square foot installed, or about $2,500 to $10,000 for a patio of 250 to 400 square feet. Pavers are durable and attractive, offering more design flexibility and visual appeal than plain concrete, and their interlocking installation resists cracking and allows individual units to be replaced if damaged. The range reflects the paver type and pattern complexity. Pavers strike a popular middle ground, more attractive and flexible than concrete, less expensive than natural stone, which is why they’re a common choice for homeowners wanting a good balance of looks, durability, and cost. (For more on this, see What Makes a Patio Cost More (or Less)?.)

Natural Stone Patios: $15 to $30 per Square Foot

Natural stone patios, using materials like flagstone, bluestone, or travertine, are the premium option at $15 to $30 per square foot. Natural stone offers a distinctive, high-end look with natural variation that manufactured materials can’t fully replicate, and it’s durable and long-lasting. The higher cost reflects both the premium material and the more skilled labor natural stone installation requires. For homeowners wanting the most upscale, natural appearance and willing to pay for it, stone delivers a premium patio, sitting at the top of the cost range. (For more on this, see How Long Does a Patio Take to Install?.)

What Else Affects the Cost

Beyond material and size, several factors shift the price. Site preparation matters, a level, accessible site is cheaper than one needing grading, excavation, or drainage work. Design complexity (intricate patterns, curves, multiple levels, borders) adds cost. Any additional features (built-in seating, fire pits, outdoor kitchens) add to the total. Removal of an existing patio adds cost. Very small patios also cost more per square foot than the ranges above suggest, because most concrete and paver contractors apply a minimum-job premium that covers mobilization, excavation, and base prep no matter how few square feet are involved. And local labor rates vary. These factors explain why two patios of the same material and size can cost differently, and why the range spans $2,000 to $12,000.

How Size and Material Combine to Set Your Total

Because patios are priced per square foot, the single most useful thing to understand about patio cost is how size and material multiply together to produce your total. A small patio in premium stone and a large patio in economical concrete can land at surprisingly similar totals, because the size and per-foot cost work against each other. This means that when you’re estimating your project, the right approach is to think in terms of both dimensions at once: roughly how many square feet you want, multiplied by the per-square-foot cost of your chosen material. A modest patio of a few hundred square feet in concrete sits near the bottom of the range, while a large patio of the same footprint in natural stone can be several times more.

Understanding this interaction gives you real control over where your project lands. If you love the look of natural stone but the total exceeds your budget, reducing the patio’s size brings the premium material back within reach, since the high per-foot cost applies to fewer feet. Conversely, if you want a large patio but need to control cost, choosing concrete or standard pavers keeps a big footprint affordable. The homeowners who are surprised by patio quotes are usually those who fixed on either a size or a material without considering how the two multiply. Approaching the estimate with both in mind, and being willing to adjust one to accommodate the other, lets you design a patio that fits both your vision and your budget rather than discovering a mismatch only when the quote arrives. (For more on this, see Concrete vs. Pavers vs. Natural Stone: Which Patio Material?.)

Getting an Accurate Price

Because a patio’s cost depends on the material, size, site conditions, and design, an accurate price depends on your specific project. A modest concrete patio on a simple site sits at the low end; a large natural-stone patio with complex design and features runs toward the top. When you’re ready for a real quote, connect with a local pro below.