What Do Electrical Repairs Cost After an Inspection?
A home electrical inspection typically produces a list of findings ranging from minor code corrections to significant system upgrades. Here is the cost of the most commonly recommended repairs.
GFCI Outlet Installation: $450 to $1,500
Adding GFCI protection to all required locations (kitchen, bathroom, exterior, garage, basement near the panel) in a home without existing GFCI protection costs $450 to $1,500 for a complete installation by a licensed electrician, since that is five to ten devices, not one. Individual GFCI outlet replacement costs $150 to $300 each installed on a standalone visit, since the device runs $15 to $50 and a single-outlet call still carries the service call fee; where several are replaced on the same trip, the per-outlet price drops toward $75 to $150. The Electrical Safety Foundation covers where GFCI and AFCI protection is required and which jobs need a licensed electrician.
Panel Replacement (Recalled Brand): $1,300 to $4,500
Replacing a Federal Pacific Stab-Lok or Zinsco panel with a modern arc-fault-protected panel from Square D, Siemens, Leviton, or Eaton costs $1,300 to $4,500. This includes the panel itself, new breakers, reconnecting all circuits, and inspection and permitting. If the service entry or meter base is also aged, additional costs of $500 to $1,500 may apply.
Service Upgrade (100 to 200 Amp): $1,500 to $4,500 or More
Upgrading from 60 or 100-amp service to 200-amp service costs $1,500 to $4,500 or more depending on whether the utility connection also needs upgrading (which involves the power company, adds coordination time and cost) and whether the panel replacement is also needed.
Aluminum Wiring Remediation: $3,500 to $20,000
AlumiConn connector remediation (installing approved connectors at every connection point) costs $3,500 to $10,000 for most homes, at roughly $90 to $110 per connection point. Complete re-wiring with copper costs $8,000 to $20,000 for an average home. The CPSC recommends remediation by a certified aluminum wiring remediation contractor a not all electricians have the specific training for this work.
Electrical Inspection Cost at a Glance
Home size: Larger homes cost more due to more circuits and area to inspect.
Home age: Older homes cost more as aging systems take more time to assess.
Location: Regional labor rates affect the price.
Overall range: $100 to $300 for a routine safety or point-of-sale inspection, averaging about $150. A full panel or code-compliance evaluation is a separate purchase at $300 to $500 and up, and on permitted work the municipal permit inspection fee is paid to the jurisdiction, not to the electrician.
Planning Your Project Budget
The cost ranges in this article are based on industry data and are intended as planning benchmarks, not fixed prices. The actual cost for your project depends on your specific home, your local labor market, the current price of materials, and the scope the contractor confirms after a site inspection. (For more on this, see How Much Does a Home Electrical Inspection Cost?.)
Always get at least two written quotes on equivalent defined scope before committing to any home services project. Wide price variation between quotes usually reflects differences in material quality, scope completeness (what is included and what is not), or contractor overhead and experience level rather than simple price competition.
Use the cost data in this article to ask better questions during the quoting process: What material is included? What does that per-square-foot or per-linear-foot rate include and exclude? Are permits, cleanup, and disposal included? What is the warranty on labor? These questions turn a quote into a comparable basis for decision-making. (For more on this, see Questions to Ask Before Hiring an Electrical Inspector.)
Working With a Contractor on This Project
Getting the right outcome on any home services project starts before the work begins. A few consistent practices make the difference between a smooth project and a frustrating one.
Get at least two or three quotes. A single quote gives you no basis for comparison. Two or three quotes reveal the market rate for the work, expose scope differences between bidders, and let you assess contractor communication quality before any commitment is made. The lowest bid is not automatically the best value if the scope is thin or the materials are underspecified.
Ask for licenses and insurance before work starts. Verify current general liability insurance and, for any work involving workers on your property, workers compensation coverage. Licensing requirements vary by state and trade; confirm the specific requirements in your jurisdiction. A licensed contractor who carries appropriate insurance protects both parties if something goes wrong during the project.
Get the scope in writing. A written proposal that specifies materials, labor scope, timeline, what is included (permits, cleanup, disposal), and warranty terms is the foundation of a professional engagement. Verbal agreements on any of these points invite misunderstanding. For any project over $500, written scope is non-negotiable.
Clarify the payment schedule upfront. A reasonable payment schedule ties major payments to project milestones: a deposit at signing, a payment at material delivery or project start, and a final payment at completion after a walkthrough confirms satisfaction. A contractor who requires full payment upfront before work begins is a red flag in any trade.
Cost figures on this page were checked against published pricing on September 2, 2026. How we source cost data.