What Does a New Garage Door Cost?
A new garage door costs $700 to $6,000 installed, averaging around $2,000 for a standard steel or insulated door replacement. The cost varies significantly by door width (single vs. double), insulation level, and material.
Cost by Type
Basic steel door: $700 to $1,500. A single-layer, non-insulated steel door in white or almond, installed on a single-car opening. The most common entry-level replacement. Adequate for a garage that is not climate-controlled and where the door faces away from the primary street view. These doors provide basic security and weather protection but minimal insulation. (For more on this, see How to Budget for a New Garage Door.)
Insulated or double-car door: $1,500 to $3,000. A double-layer (sandwich construction) steel door with polyurethane or polystyrene insulation. The insulation significantly reduces noise transmission and maintains more stable temperatures in an attached garage. A double-car (16-foot wide, 7-foot tall) insulated door is the most common residential replacement in this range. (For more on this, see How Much Does a Garage Door Cost?.)
Custom or premium material door: $4,000 to $10,000 installed. Wood (cedar or redwood), composite wood-look, aluminum with glass panels, or carriage-house style doors. These doors provide superior curb appeal and are appropriate for homes where the garage door is a primary visual element of the facade. Wood doors require painting or staining every 3 to 5 years; aluminum-glass and composite doors require minimal maintenance. (For more on this, see Garage Door Materials Compared: Steel, Wood, Aluminum, and Composite.)
Installation Cost
Installation (removing the old door, installing the new door and hardware, adjusting the opener): $750 to $1,800 of the total quoted price for a standard residential installation, and that line repeats per door on a two- or three-door garage. A new door is almost always installed with new springs, cables, and hardware — the existing hardware is typically at or near end of life when a door is replaced and should not be reused.
Garage Door Cost at a Glance
| Cost Factor | Typical Range | Notes |
|---|---|---|
| Basic steel single-car door installed | $700 to $1,500 | |
| Insulated or double-car door installed | $1,500 to $3,000 | |
| Custom or premium material door | $4,000 to $10,000 installed | Priced per door, and above the top of the overall range |
| Overall range | $700 to $6,000 | Per door, averaging $2,000 for a standard steel or insulated replacement |
Cost figures on this page were checked against published pricing on September 2, 2026. How we source cost data.
Planning Your Project Budget
The cost ranges in this article are based on industry data and are intended as planning benchmarks, not fixed prices. The actual cost for your project depends on your specific home, your local labor market, the current price of materials, and the scope the contractor confirms after a site inspection.
Always get at least two written quotes on equivalent defined scope before committing to any home services project. Wide price variation between quotes usually reflects differences in material quality, scope completeness (what is included and what is not), or contractor overhead and experience level rather than simple price competition.
Use the cost data in this article to ask better questions during the quoting process: What material is included? What does that per-square-foot or per-linear-foot rate include and exclude? Are permits, cleanup, and disposal included? What is the warranty on labor? These questions turn a quote into a comparable basis for decision-making.
Working With a Contractor on This Project
Getting the right outcome on any home services project starts before the work begins. A few consistent practices make the difference between a smooth project and a frustrating one.
Get at least two or three quotes. A single quote gives you no basis for comparison. Two or three quotes reveal the market rate for the work, expose scope differences between bidders, and let you assess contractor communication quality before any commitment is made. The lowest bid is not automatically the best value if the scope is thin or the materials are underspecified.
Ask for licenses and insurance before work starts. Verify current general liability insurance and, for any work involving workers on your property, workers compensation coverage. Licensing requirements vary by state and trade; confirm the specific requirements in your jurisdiction. A licensed contractor who carries appropriate insurance protects both parties if something goes wrong during the project.
Get the scope in writing. A written proposal that specifies materials, labor scope, timeline, what is included (permits, cleanup, disposal), and warranty terms is the foundation of a professional engagement. Verbal agreements on any of these points invite misunderstanding. For any project over $500, written scope is non-negotiable.
Clarify the payment schedule upfront. A reasonable payment schedule ties major payments to project milestones: a deposit at signing, a payment at material delivery or project start, and a final payment at completion after a walkthrough confirms satisfaction. A contractor who requires full payment upfront before work begins is a red flag in any trade.